![Heater Block V2](http://www.distechautomation.com/cdn/shop/products/Heater_Block_530x@2x.jpg?v=1497983750)
- 1x Aluminium Heater Block for Prometheus V2
[Note: These heater blocks are backward compatible with Prometheus V1.1]
Design Features
- 6mm hole for a standard heater cartridge clamped by the heater block.
- Thermistor hole adjacent to M3 threaded hole which allows thermistors to be held in place with an M3 bolt and washer.
- 3mm through hole allows for the use of PT100 sensor cartridge.
- Additional aluminium hex nuts can be fastened to the heater block to customize the “melt-zone” length.
Customer Reviews
Based on 1 review
Write a review